SOHOturbointro

350z turbo kit

SOHO G35 & 350Z Single Turbo Kit VQ35DE Motor

The SOHO Motorsports Single Turbo Kit for the Nissan 350Z and Infiniti G35 has been designed for the specific purpose of being the best and most efficient single turbo kit on the market for the VQ35DE platform. With many years of experience of building and racing VQ’s up our sleeves, we have taken all of our accumulated experience and spent many hours of research and development on paper, on dyno and on track to make the best kit possible! We have ensured that extra attention has been given to every single detail on the SOHO Motorsports Single Turbo kit. All of those details can be found in the somewhat lengthy description below. Every design choice and product choice has been carefully and strategically calculated to create the best single turbo kit possible. On top of making this kit the most effective and powerful kit possible, we spent time to make sure our design required little to no modification to the engine bay during install. Making installation cheaper or quicker and maintenance hassle free.

DSC00370_WM

Our SOHO Motorsports Single Turbo Kit for VQ35DE engines is a truly unique forced induction system. Using the completely stock VQ35DE engine with no other aftermarket modifications, we have pushed the VQ to its safe daily driven stock block limit. On a very conservative long lasting tune, our Dyno Jet dynamometer made 412hp and 405tq at a very low boost setting of 8psi. With our unique design, our turbo kit features a near instant power curve that not only achieves full boost around the very low rpm of 3,200 but also has amazing mid and high range power and torque. Leaving the driver with a very even and powerful curve all the way to redline. The new Garrett GTX3582R turbo mixed with our unique routing and piping diameter choices make this kit a perfectly balance forced induction kit for anything from street use to track abuse, stock engine or fully built beast.

SOHO Motorsports Single Turbo Kit (Base Model w/ GT3582R)

Along with our unique design and meticulous attention to detail, we have also utilized the best companies in the industry to supply the necessary pieces for our SOHO turbo kit. Such as Garrett, Tial, Turbo Smart, Bell, AAM, Deatschwerks, Russell and UpRev. Their products are used on our kit because they make some of the best products on the market and are made and manufactured in the highest possible quality. These products have been tested and proven many times over on our street cars and pushed to their limits by our racing program for years. Everything we have learned from our long history on and off the track combined with our deep passion for the VQ platform has been molded into what we consider the perfect single turbo kit for Nissan 350Zs and Infiniti G35s! Please review the following description of the turbo kit which has been broken down into sections based on design components.

SOHOturboLOGO-15

The Turbo

The SOHO Motorsports Single Turbo kit uses the newest Turbo by Garrett GTX 35 series turbo, the GTX3582R. Garrett turbos are a mainstay in the industry and have proven to be one of the best turbo manufacturers on the planet. We chose the GTX turbo over the normal GT turbo series because the GTX turbo remains in a higher efficiency range on the compressor map for a longer duration than the regular GT turbo thanks to its new design. The GTX is a water and oil cooled, ball bearing turbo with a billet compressor wheel that features a ported shroud compressor housing to increase surge resistance, a design that is unique to only the GTX turbo series.

The Turbo by Garrett compressor wheel and housing is accompanied by the Tial 1.06 v-band exhaust housing, which allows for the best possible turbo combination with nearly no lag time along with great mid range torque and high end power. This turbo setup combined with our unique piping layout make our kit a perfectly balanced forced induction setup for anything from daily driving to relentless race track abuse. If you are cruising on the highway, launching at the stop light, racing on track or drifting the SOHO turbo kit layout matched with the GTX3582R turbo is the perfect setup for your VQ.

SOHOturboLOGO-20

Cold Side Piping

The entirety of the SOHO Motorsports single turbo kit is made from high quality stainless steel. Stainless is used, rather than the industry standard of aluminum, because it has almost a tenth of the heat transfer coefficient of aluminum, which means that it does not absorb heat as quickly as aluminum. Along with the reduced coefficient of heat transfer, stainless steel is also much much more durable and has a very minimal weight difference than aluminum. Using the best quality materials and our unique piping layout, our kit is designed specifically to not only reduce heat soak in the engine bay but also reduce turbo lag, boost creep and boost fall off as seen on many other kits.

Our design begins with the stainless 2.5 inch charge pipe coming off the GTX35R compressor housing and leads from the turbo’s position adjacent to the driver’s side head light directly to the 3 inch opening on the SOHO Motorsports intercooler on the passenger side. The charge pipe runs from the turbo down to the bottom side of the engine bay and parallel to the bottom of the radiator, away from the extra heat of the engine bay and allowing the pipe to be cooled by outside air. A silicone coupler transitions the 2.5 inch charge pipe to the 3.0 inch intercooler end tank opening allowing for an increase in spool and reduced lag time. Sustaining the piping size equivalent to the turbo outlet allows for the air to keep the same velocity until it travels to the intercooler where changes in pressure allow for the air to increase in velocity as it makes its way towards the throttle body.

Our specifically designed intercooler, which uses a Bell core, is designed to aid in decreasing pressure loss and improve cooling efficiency across the entirety of its core surface. We have also taken extra effort on the design of the intercooler by determining the best angle for the end tanks to help aid in channeling the air as close to the center of the core as possible, allowing for better and more efficient cooling. Routing our piping this way makes our kit especially effective on the street or on track, with nearly no turbo lag and maximum boost seen significantly early at around 3,200rpm on a stock VQ35DE all while keeping engine temperatures low. (Note: Mishimoto reflective gold heat tape, seen in these pictures below, does not come with the standard turbo kit and is an additional fee).

SOHOturboLOGO-5

Heat can be detrimental to any vehicle from street cars to race cars, and at SOHO we pay close attention to the needs of all uses our kit will take on. G35s and 350Zs are versatile sports cars used in all forms of motorsports and anyone who has pushed the limits knows of the excessive under hood temperatures these vehicles may see during extended spirited driving. When adding a turbo kit under the hood of these platforms, temperatures will obviously increase, and is a large concern on most forced induction kits. We have seen this first hand on our race car’s previous setup and have addressed this issue on our turbo kit by routing the charge pipe as close to the bottom of the vehicle as possible in an area that is not lower than the sub frame of the vehicle, and not in danger of any road debris.

Routing the charge pipe beneath the radiator and in the cool air, instead of above the radiator like most kits, allows cool air convection to take place as air passes underneath the vehicle and across the surface of the charge pipe. Convection will occur as air travels over the pipe at speed, dissipating a vast amount of the heat that the pipe may receive as it passes by the bottom of the radiator. This allows the air traveling towards the intercooler to be more effectively cooled, and in turn, making the the air enter the engine in a quicker and cooler fashion, allowing for more responsive power.

All of the piping on the SOHO kit requires little to no modification to a stock vehicle, allowing for a simple install and nothing extra to do under the hood. Abiding by our OEM style setup the MAF sensor is still within reach of its stock harness, but it has been moved closer to the throttle body than most kits on the market. Moving this sensor closer to the throttle body will help in resolving any hesitation that may occur during daily driving or tracking as seen in other kits. We have learned from our racing program that with the new MAF location, the car is much more responsive to throttle input in any condition and allows for more accurate tuning on the dynamometer.

SOHOturboLOGO-2

Hot Side Piping

The hot side piping of the SOHO Motorsports single turbo kit was designed to be minimally invasive to the underside of the vehicle while allowing the best route for the exhaust gases to flow. All of the piping utilizes v-band clamps to eliminate the use of exhaust gaskets and to ensure the best contact amongst pipes. There are no clearance issues that the end user will come across with this kit, no matter how low your vehicle may be, as we have placed the hot side piping high enough up and tucked around the transmission. Keeping with the OEM style theme of the kit the exhaust manifold piping utilizes the same inner diameter as the stock manifolds, which allows for the exhaust gases to sustain the same velocity and prevents any change in pressure gradients as seen when going to a larger diameter pipe in other kits.

Once the exhaust gases leave the manifolds they travel into a custom two into one collector that allows the two exhaust banks to merge smoothly, reducing any unwanted back pressure. After the collector the exhaust gases are quickly moved to the turbo via the up pipe which has an overall diameter slightly larger than the manifold pipes to also aid in reducing any back pressure where both manifolds meet at the collector. We have taken an extra step to ensure that the end user will not run into any check engine lights as well on our kit and we have created two extra bungs on the down pipe that are both within reach of the stock oxygen sensor harness to allow for the rear oxygen sensors to be functional unlike many kits on the market that require the removal of those sensors.

SOHOturboLOGO-13

The location of the waste gate has been placed away from the turbo and down-pipe and off of the collector in an effort to help sustain the boost pressure off of the waste gate spring and also eliminate any boost fluctuation throughout the entire power band. The waste gate has been placed closer to the exhaust side to allow for minimal pressure changes when the waste gate opens and exhaust gases from the dump tube travel back into the exhaust system. On many kits the waste gate dump re-connects where the down pipe meets the exhaust close to the turbo. This isn’t proper placement because introducing even more turbulent exhaust gasses from the waste gate to the already large amounts of turbulent exhaust gases exiting the turbo via the down pipe can often lead to an unwanted increase in back pressure, thus making the engine work harder. Placing the waste gate further back as we have done on our kit allows the exhaust gases to settle from the turbulence exiting the turbo and dumps them back into the exhaust system further away, allowing the transition of the two flows to be smoother.

Along with the unique layout and use of top quality parts on the SOHO Single Turbo kit we also offer our custom 3 inch stainless steel single cat back exhaust featuring a race resonator to help reduce the decibel level and create a deep sound unique to our exhaust. We even include this exhaust as part of our Premium Turbo kit at no extra charge. But even if you don’t love our exhaust any stock fitting aftermarket cat back exhaust will work perfectly with our kit, although we advise against it for best performance results.

SOHOturboLOGO-11

Fuel System and Engine Management

With the installation of a forced induction kit of any kind on the VQ35DE platforms, the fuel system needs to be addressed. A forced induction kit will obviously increase the amount of air that the engine will see, thus in order to maintain a safe air-fuel ratio, there will be an increase in the amount of fuel that the motor will need. The stock size fuel pump and injectors are incapable of maintaining the fuel flow necessary to make power safely under boost. This is why our Premium Turbo kit features the perfect combination for the increased demands by way of an upgraded Deatschwerks 265lph drop-in fuel pump and Deatschwerks 600cc fuel injectors. Both of our Base and Premium kits include an AAM oil pan spacer which allows for an extra quart of oil and also features a pre-drilled/tapped oil drain pickup. This eliminates any drilling or modifying that may need to be done to the engine block as seen on many on other turbo kits. A custom SOHO oil catch can is also included in the kit to aid in the removal of any excess oil that may, during spirited driving, breathe from the crank case via its pressure relief hose. Many kits on the market feed this hose back into the intake under boost, which can contaminate the spark plugs with the crank case oil, thus reducing power. We have seen first hand on our race car just how much oil is dumped from the crank case in high G corners and hard driving, and routing it to anything other than a catch can be detrimental to power and performance.

SOHOturboLOGO-14

With the increased power levels due to the addition of boost and the increased amount of fuel available due to the injectors and pump, the Premium kit comes supplied with an UpRev Osiris engine management system and a SOHO tuned base map. UpRev is a very effective engine management system that utilizes the intelligent Nissan factory ECU to adjust parameters properly for any G or Z whether it is naturally aspirated or forced induction. The SOHO base tune will be supplied to reputable dealers, installers and tuners as a means to flash the recently modified turbo VQ via the UpRev licensed cable connected to the factory OBDII port. This will allow the user to start and run the newly installed SOHO turbo kit but is not meant to be a one size fits all final tune. The base map is a benchmark provided to the approved tuner to begin with, as they will need to tune the vehicle based on other modifications, altitude, weather, overall condition of the engine and general purpose of the vehicle. This will allow for the end result to be a perfect system for your specific G or Z having addressed every necessary component on the vehicle.

The SOHO Motorsports Single Turbo kit for Nissan 350Zs and Infiniti G35s is a uniquely designed forced induction system that utilizes the best products on the market and combines it into a minimally invasive turbo kit suitable for any use that a VQ35DE engine may see. From daily driving to drag racing to drifting to time attack, the SOHO Turbo kit is the best forced induction option on the market for the Nissan and Infiniti VQ platforms! Check out the photos and videos of the kit on our website. And contact us today for more information or come by the shop and see the kit for yourself!

Visit our online store for pricing in regards to our turbo kit HERE!

350z turbo kit

SOHO VQ Single Turbo Kit – Base Model

SOHO Motorsports Single Turbo Kit (Base Model)

– Garrett GTX 3582R Turbo
– Tial 1.06 V-Band Housing
– TurboSmart Wastegate & Blow Off Valve
– All Necessary Cold & Hot Stainless Steel Piping
– SOHO Engineered Intercooler
– SOHO Oil Catch Can
– Oil Pan Spacer Kit
– Simple Install & Maintenance Friendly
* Base Model is available for individuals who already have required fuel and ecu components.
** Turbo Kit works with stock exhaust manifolds, most aftermarket headers and most aftermarket cat-back equivalents.

SOHO VQ Single Turbo Kit – Premium Model

SOHO Motorsports Single Turbo Kit (Premium Kit)

– Garrett GTX 3582R Turbo
– Tial 1.06 V-Band Housing
– TurboSmart Wastegate & Blow Off Valve
– All Necessary Cold & Hot Stainless Steel Piping
– SOHO Engineered Intercooler
– SOHO Oil Catch Can
– SOHO Air Intake
– Oil Pan Spacer Kit
– UpRev Osiris Engine Management & MAF Sensor
– Deatschwerks Drop-In 265lph Fuel Pump
– Destschwerks 600cc Injectors
– Powder or Heat Coated (Additional Fee)
– Simple Install & Maintenance Friendly
* Base Model is available for individuals who already have required fuel and ecu components.
** Turbo Kit works with stock exhaust manifolds, most aftermarket headers and most aftermarket cat-back equivalents.

For more info on our VQ35 Turbo Kits and VQ35 Short/Longblock’s please give us a call!