February 10, 2015 2 min read
Our dual exhaust system allows the end user to incorporate their current test pipes or the SOHO Motorsports test pipes with the use of a 2.5" flange welded to a 2.5" to 3.0" exducer, which can be seen in the picture above. An X-Pipe was developed to aid with the scavenging of the exhaust gases and to eliminate any rasp, which can be seen in the pictures below.
The remainder of the exhaust has been designed with the least restrictive path for the exhaust gases to go with plenty of room to clear the rear sway bar and utilize the stock location exhaust hangers which can be seen in the pictures below.
The mufflers that are offered with the dual exhaust system have a slip joint and uses the stock exhaust hanger locations with 4.0" angle cut exhaust tips.
Wether you are a turbocharged or a supercharged vehicle that is looking for an aggressive tone from your exhaust or you believe that you are not making the neccessary power from your current setup, the SOHO Motorsports dual exit exhaust system is the system for you. Below are a few exhaust clips and a link to our online store where you can view the pricing for this system.
*SOHO Motorsports Built Motor w/ JWT twin turbo kit (SOHO Motorsports Test Pipes & Dual Exit Exhaust System)*
[video width="640" height="368" mp4="https://sohomotorsports.com/wp-content/uploads/2015/02/video-1417701665.mp4.mp4"][/video]
*Built Motor w/ Vortech Supercharger kit (SOHO Motorsports Test Pipes & Dual Exit Exhaust System)*
[video width="568" height="320" mp4="https://sohomotorsports.com/wp-content/uploads/2015/02/video-1423612423.mp4.mp4"][/video]
[video width="568" height="320" mp4="https://sohomotorsports.com/wp-content/uploads/2015/02/video-1423612406.mp4.mp4"][/video]
SOHO Motorsports Dual Exit Exhaust System Price